What did you do to your car today?

Bjohnson wrote:

Put LED dome, map, and license plate lights in moms csx. I took the photo's with the same settings and in the same positions to show the difference, its crazy.

New license plate:


Also, none of these pictures were edited. I they went straight from my camera to my flickr then on here.

Sik Rider PLate!!! those are actually pretty bright where did ya gett them from

that is really neat bj but please start working on your car lol

Converting all my lights into white LED's just a sneak peak of some of the stuff. Sorry for the horrible cell phone pics

wtf are we even looking at lol

undercoated the body, POR15'd the frame, installed the trac bar properly, and am now just waiting on wheels and tires.

Jhall wrote:

wtf are we even looking at lol

lolololololoolol, ignition barrel, keyhole light. these use to be a dull green. Will have more detailed photo's once the interiors all done

Zimm wrote:

Sik Rider PLate!!! those are actually pretty bright where did ya gett them from

i got them from ijdmtoy.com

started working on my own car because Jhall was being a hater

sorry i had to! lol

Talked my way out of a ticket. Yaa Buddy.


Now who wants to put HID's in a Civic Si tonight?

booked car in to get rear diff built

Rob wrote:

booked car in to get rear diff built

Who are you getting to do that? Do we have a "diff shop" here?

Sleypr wrote:

Rob wrote:

booked car in to get rear diff built

Who are you getting to do that? Do we have a "diff shop" here?

Dan vogt at Vogt brothers auto

Cool, good to know thanx.

drove it,
WHEEWW

got a phone call from the company building my new short block and they said a new oem crank is back ordered from mitsu so they offered a manley 95mm crank for 400$ more making my engine 2.2L so i pulled the trigger on it ... full specs on the new engine are.

manley 94mm crank
manley h-beam
manley 9.0CR pistons with factory 86mm bore
acl bearings
arp head studs and mainstuds
hks head gasket
brian crower stage 2 cams (272intake/exhaust)
brian crower valves, springs, and retainers

my head is getting rebuilt here in regina with those internals, new oem block with built internals is getting assembled by map being shipped out hopefully next week from Minneapolis to minot.

turbo is a gt35r compressor customized to the factory evo x housing to reduce turbo lag and easy fitment so im told.

still need to figure out what im going to do for fueling and need to decide on flywheel and clutch.

yesterday i picked up random beer cans from under my car and my mailbox?? hahah i guess saturday was a good night

EVOXXX wrote:

got a phone call from the company building my new short block and they said a new oem crank is back ordered from mitsu so they offered a manley 95mm crank for 400$ more making my engine 2.2L so i pulled the trigger on it ... full specs on the new engine are.

manley 94mm crank
manley h-beam
manley 9.0CR pistons with factory 86mm bore
acl bearings
arp head studs and mainstuds
hks head gasket
brian crower stage 2 cams (272intake/exhaust)
brian crower valves, springs, and retainers

my head is getting rebuilt here in regina with those internals, new oem block with built internals is getting assembled by map being shipped out hopefully next week from Minneapolis to minot.

turbo is a gt35r compressor customized to the factory evo x housing to reduce turbo lag and easy fitment so im told.

still need to figure out what im going to do for fueling and need to decide on flywheel and clutch.

why not go gtx, they make a evo housing also

nguyen306 wrote:

why not go gtx, they make a evo housing also

it was considered but map makes the turbo im getting (same company thats building my block and sold me my head internals) and they gave me a deal i couldnt pass up.

Maperformance?

nguyen306 wrote:

Maperformance?

yepp those are the guys

new wheels and tires for the TJ showed up
new VS old:


33x12.5R15s and 15x10 Outlaw II

hate those wheels cool jeep tho

Love it mang

great looking jeep, nice colour.