Parts for sale. Minibrutes help drifting?

Hey guys,

As i was talking to ryan, and the other guys out at the events.
Minibrutes does direct imports of vehicles, and parts (rims, aero kits, seats, etc)

I can/ or i have people who can pretty much find whatever your looking for.


Rims = average price (800-1200$) Can be higher, however it depends on company, size, width, offset)
I picked up my work eurolines 18x9.5/18x10.5 for 1000$ w/ tires. and my 17 drift spares (17x8+2, 17x9+10) for 400$ w/o tires.

Picture:




Aero kits: average price (1000-1500$) depends on company to determine price.
I picked up a legit BN sports kit for 1000$ shipped to saskatoon, non-legit sells for 1200$, legit sells for 1800$ + before shipping.

Picture of BN sports kit:



Seats = average 800-1000$ depends on company, and such as well.

Pictures: Of all the seats


Here is a photos of previous part shipments:








Ryan and jesse, what kind of aero kit where you looking for your 4 doors?

Pictures of kits i have found so far:

Bn sports kit (picture is of 2 door, but it is for a 4 door):


Vertex 4 door:


Also, talk with ryan to further support saskatchewan drifting, and maybe put on our own event.

pm me for pricing, or send me a email jared@minibrutes.com or call (306)249-9013 name is Jared

can you guys source single wheels? or parts for 2 piece wheels? (fucking pot holes)

raboyto2 wrote:

can you guys source single wheels? or parts for 2 piece wheels? (fucking pot holes)

What kind of wheel?
Usually sourcing one is quiet difficult, due to size, width and offset. Unless it was a common size they made.

what kind of piece for the 2 piece rim? the barrel?

Also the easiest route would be going to a staggered set up? Ie: you keep your two good wheels, and then you buy two through us.

Let me know.

i will talk to you in thenear future, ill be looking at getting a weekend fun/ drift car.

Silvianow wrote:

raboyto2 wrote:

can you guys source single wheels? or parts for 2 piece wheels? (fucking pot holes)

What kind of wheel?
Usually sourcing one is quiet difficult, due to size, width and offset. Unless it was a common size they made.

what kind of piece for the 2 piece rim? the barrel?

Also the easiest route would be going to a staggered set up? Ie: you keep your two good wheels, and then you buy two through us.

Let me know.

18" fabulous profound WORK, need the barrel. -30 mm offset , 9.5 inches wide.

(they do have some curb rash, so if you could find 2 of those, and 2 of the same spec but 10.5 inches wide... giving it 4 new barrels)

nice, i will be msging u the future.

how about an idler arm for a 1992 Hilux Surf ???

i think the fellow that works there already tried to bring one in for me, but it turned out to be different? but maybe you can find one!

this is what i need.

vertex sides and rear is what im needin :p

Just to let you guys know, we are doing a container load of parts.
Should be getting shipped out early october.

Let me know what you want. Most items will need to be pre-paid (special order)

Hey man I may have to talk to you sometime about seats and steering wheels, both are on my list so that next year I can get out and drift more. I tried drifting out during the last practice before the competition and was getting tossed around like a rag doll in my stock 180sx seat.

Hey, check your pm's. I sent you one.

oh oh... this would be amazing if you could source. i dont know if you can or not. i fucked mine up.

new or used (used is fine, new is better)

CT20 off a 1992 toyota diesel engine : 2L-TE. but it has to be with the square inlet on the hot side, not the round inlet used on the older models. Theres alot of versions of the CT-20 out there...

pictures.












NOT like this :

whats the cheapest drift caryou can import ?

i want a cressida now so see how cheap you can get one for

You mean a Mark II, Chaser and Cresta?
Also a simple thank you makes everything go easier.

they acually made cresida's in japan before 88 i think then they changed the name of them to what you said but thats besides the point what's the cheapest i could get one for pre 88 also intrested in soarer's some prices ? :!:THANKS

you dont what pre 88, they dont come with a 1j then,.

Well cheapest is going to be 4500$ (this needs to be a full container tho, 4 cars)
otherwise your looking at 4800$ per car.
Taxes paid, delivered to saskatoon. At that price, you dont get much choice because the picking are slim.
since the vast majority of the price is shipping cost, export, import etc costs. The car is the cheap part.

Silvianow wrote:

Well cheapest is going to be 4500$ (this needs to be a full container tho, 4 cars)
otherwise your looking at 4800$ per car.
Taxes paid, delivered to saskatoon. At that price, you dont get much choice because the picking are slim.
since the vast majority of the price is shipping cost, export, import etc costs. The car is the cheap part.

Hey i don't know what happened. I'd thought i'd posted this already, maybe i pm'ed you lol but i forget. Anyways.

Could you get me a price on 4 Advan RG's (preferably gold) in 17x8 offset +53 or +48 (don't remember) also 5 x 100.
I appreciate it, Thank you!

Just want to let you guys know, i have a couple sets of rims for sale.

https://qcautomotive.forumakers.com/automotive-parts-f9/fs-17-work-eurolines-17x82-17x910-t2155.htm

https://qcautomotive.forumakers.com/automotive-parts-f9/fs-18-eurolines-18x9540-18x10540-t2156.htm